Learning to implement Structured Text for Assembly Lines using Inovance's InoProShop / AutoShop is a useful skill for PLC programmers working in Manufacturing. This guide walks through the fundamentals with clear explanations and an illustrative example that you can adapt to a simulator or test bench.
The example uses Inovance terminology and references controller families such as AM600 and AM610. Confirm the exact instructions, data types, firmware requirements, and licensing in the current vendor documentation before choosing hardware or deploying a project.
The Structured Text approach is particularly well-suited for Assembly Lines because complex calculations, data manipulation, advanced control algorithms, and when code reusability is important. This combination allows you to leverage powerful for complex logic while managing the typical challenges of Assembly Lines, including cycle time optimization and quality inspection.
Throughout this guide, you'll find step-by-step implementation guidance, an illustrative code example, and a verification checklist specific to Manufacturing. Whether you're programming your first Assembly Lines exercise or transitioning from another PLC platform, use the material as a starting point and validate it in your exact InoProShop / AutoShop version and controller environment.
Inovance InoProShop / AutoShop for Assembly Lines
InoProShop / AutoShop is a programming environment associated with Inovance controller families such as AM600, AM610, H5U. This guide uses Structured Text terminology from the supplied guide dataset, but controller capabilities and language support can change by model, firmware, software edition, and license.
Verify Before You Start:
- The selected controller supports the required Structured Text constructs
- The project version matches the installed InoProShop / AutoShop release
- Required communications, motion, safety, and simulation options are licensed
- Firmware and device-description files are compatible with the project
- The vendor manuals used for the design match the exact hardware revision
Application Planning:
For a Assembly Lines exercise, map the required inputs and outputs before writing logic. The example considers 5 sensor types, including Vision systems, Proximity sensors, Force sensors, and 5 actuator types.
Control Equipment for Assembly Lines:
- Assembly workstations with fixtures
- Pallet transfer systems
- Automated guided vehicles (AGVs)
- Collaborative robots (cobots)
Controller-family references used in this guide include:
- AM600: Confirm CPU, I/O, memory, communications, and Structured Text support in the current selection guide
- AM610: Confirm CPU, I/O, memory, communications, and Structured Text support in the current selection guide
- H5U: Confirm CPU, I/O, memory, communications, and Structured Text support in the current selection guide
- AC800: Confirm CPU, I/O, memory, communications, and Structured Text support in the current selection guide
Hardware Selection Checklist:
- Count local and remote I/O, including planned expansion
- Measure the required task and communications update rates
- Identify memory, data-retention, diagnostics, and cybersecurity requirements
- Treat safety functions as a separate, standards-led design activity
- Confirm lifecycle status, regional availability, licensing, and support
Source and Validation Note:
This page does not represent a vendor certification or a hardware acceptance test. Use current Inovance manuals, release notes, and safety documentation as the authority for product-specific behavior. Validate adapted logic in a simulator or isolated test setup before connecting it to equipment.
Investment Considerations:
For Assembly Lines projects, compare hardware, software licensing, training, engineering, test equipment, commissioning, spares, and ongoing support. Obtain current pricing and lifecycle information directly from the vendor or an authorized regional supplier.
Understanding Structured Text for Assembly Lines
Structured Text (ST) is a high-level, text-based programming language defined in IEC 61131-3. It resembles Pascal and provides powerful constructs for complex algorithms, calculations, and data manipulation.
Execution Model:
Code executes sequentially from top to bottom within each program unit. Variables maintain state between scan cycles unless explicitly reset.
Core Advantages for Assembly Lines:
- Powerful for complex logic: Critical for Assembly Lines when handling intermediate to advanced control logic
- Excellent code reusability: Critical for Assembly Lines when handling intermediate to advanced control logic
- Compact code representation: Critical for Assembly Lines when handling intermediate to advanced control logic
- Good for algorithms and calculations: Critical for Assembly Lines when handling intermediate to advanced control logic
- Familiar to software developers: Critical for Assembly Lines when handling intermediate to advanced control logic
Why Structured Text Fits Assembly Lines:
Assembly Lines systems in Manufacturing typically involve:
- Sensors: Part presence sensors for component verification, Proximity sensors for fixture and tooling position, Torque sensors for fastener verification
- Actuators: Pneumatic clamps and fixtures, Electric torque tools with controllers, Pick-and-place mechanisms
- Complexity: Intermediate to Advanced with challenges including Balancing work content across stations for consistent cycle time
Programming Fundamentals in Structured Text:
Variables:
- declaration: VAR / VAR_INPUT / VAR_OUTPUT / VAR_IN_OUT / VAR_GLOBAL sections
- initialization: Variables can be initialized at declaration: Counter : INT := 0;
- constants: VAR CONSTANT section for read-only values
Operators:
- arithmetic: + - * / MOD (modulo)
- comparison: = <> < > <= >=
- logical: AND OR XOR NOT
ControlStructures:
- if: IF condition THEN statements; ELSIF condition THEN statements; ELSE statements; END_IF;
- case: CASE selector OF value1: statements; value2: statements; ELSE statements; END_CASE;
- for: FOR index := start TO end BY step DO statements; END_FOR;
Best Practices for Structured Text:
- Use meaningful variable names with consistent naming conventions
- Initialize all variables at declaration to prevent undefined behavior
- Use enumerated types for state machines instead of magic numbers
- Break complex expressions into intermediate variables for readability
- Use functions for reusable calculations and function blocks for stateful operations
Common Mistakes to Avoid:
- Using = instead of := for assignment (= is comparison)
- Forgetting semicolons at end of statements
- Integer division truncation - use REAL for decimal results
- Infinite loops from incorrect WHILE/REPEAT conditions
Typical Applications:
1. PID control: Directly applicable to Assembly Lines
2. Recipe management: Related control patterns
3. Statistical calculations: Related control patterns
4. Data logging: Related control patterns
Understanding these fundamentals prepares you to implement effective Structured Text solutions for Assembly Lines using Inovance InoProShop / AutoShop.
Implementing Assembly Lines with Structured Text
Assembly line control systems coordinate the sequential addition of components to products as they move through workstations. PLCs manage station sequencing, operator interfaces, quality verification, and production tracking for efficient manufacturing.
This walkthrough demonstrates practical implementation using Inovance InoProShop / AutoShop and Structured Text programming.
System Requirements:
A typical Assembly Lines implementation includes:
Input Devices (Sensors):
1. Part presence sensors for component verification: Critical for monitoring system state
2. Proximity sensors for fixture and tooling position: Critical for monitoring system state
3. Torque sensors for fastener verification: Critical for monitoring system state
4. Vision systems for assembly inspection: Critical for monitoring system state
5. Barcode/RFID readers for part tracking: Critical for monitoring system state
Output Devices (Actuators):
1. Pneumatic clamps and fixtures: Primary control output
2. Electric torque tools with controllers: Supporting control function
3. Pick-and-place mechanisms: Supporting control function
4. Servo presses for precision insertion: Supporting control function
5. Indexing conveyors and pallets: Supporting control function
Control Equipment:
- Assembly workstations with fixtures
- Pallet transfer systems
- Automated guided vehicles (AGVs)
- Collaborative robots (cobots)
Control Strategies for Assembly Lines:
1. Primary Control: Automated production assembly using PLCs for part handling, quality control, and production tracking.
2. Safety Interlocks: Preventing Cycle time optimization
3. Error Recovery: Handling Quality inspection
Implementation Steps:
Step 1: Document assembly sequence with cycle time targets per station
In InoProShop / AutoShop, document assembly sequence with cycle time targets per station.
Step 2: Define product variants and option configurations
In InoProShop / AutoShop, define product variants and option configurations.
Step 3: Create I/O list for all sensors, actuators, and operator interfaces
In InoProShop / AutoShop, create i/o list for all sensors, actuators, and operator interfaces.
Step 4: Implement station control logic with proper sequencing
In InoProShop / AutoShop, implement station control logic with proper sequencing.
Step 5: Add poka-yoke (error-proofing) verification for critical operations
In InoProShop / AutoShop, add poka-yoke (error-proofing) verification for critical operations.
Step 6: Program operator interface for cycle start, completion, and fault handling
In InoProShop / AutoShop, program operator interface for cycle start, completion, and fault handling.
Inovance Function Design:
InoProShop strongly favours function-block reuse via the Library Manager — Inovance ships standard libraries for motion, drives, HMI, OPC UA, and industry-specific applications (lithium-battery, EV, elevator). AutoShop reuse is open-coded via P-label subroutines. OEM machine-builders increasingly default to InoProShop / AM600 to access the FB libraries.
Common Challenges and Solutions:
1. Balancing work content across stations for consistent cycle time
- Solution: Structured Text addresses this through Powerful for complex logic.
2. Handling product variants with different operations
- Solution: Structured Text addresses this through Excellent code reusability.
3. Managing parts supply and preventing stock-outs
- Solution: Structured Text addresses this through Compact code representation.
4. Recovering from faults while maintaining quality
- Solution: Structured Text addresses this through Good for algorithms and calculations.
Safety Considerations:
- Two-hand start buttons for manual stations
- Light curtain muting for parts entry without stopping
- Safe motion for collaborative robot operations
- Lockout/tagout provisions for maintenance
- Emergency stop zoning for partial line operation
Performance Metrics:
- Task and I/O timing: Record minimum, average, and maximum values under a defined test load
- Accuracy: Define an acceptable tolerance and compare it with calibrated reference measurements
- Throughput: Count completed cycles over a fixed interval and record rejected or incomplete cycles
- Fault response: Measure detection, safe-state, alarm, and recovery behavior for each test case
- Resource use: Record memory, communications load, and diagnostic-buffer behavior
Inovance Diagnostic Tools:
InoProShop online mode with full POU monitoring and breakpoint debug,EtherCAT diagnostics page with topology and slave status,Trace tool for analogue / motion signal capture,OPC UA server diagnostics page,Modbus communication trace utility,AutoShop online mode for legacy AC800 / Easy series,Inovance HMI integrated diagnostics for HMI-PLC binding faults,Servo-drive panel diagnostics with InoProShop drive-monitor view,EtherCAT slave-firmware update tool,Project compare tool for change tracking
Use the monitoring and diagnostic functions available in your InoProShop / AutoShop version, and record the software, firmware, hardware, workload, and test procedure with every result.
Inovance Structured Text Example for Assembly Lines
Illustrative Structured Text example for Assembly Lines using Inovance terminology. Adapt the syntax to your InoProShop / AutoShop release, compile it, and verify it in an isolated test environment before use on equipment.
(* Inovance InoProShop / AutoShop - Assembly Lines Control *)
(* Structured Text Implementation for Manufacturing *)
(* On InoProShop projects, conventions follow CODESYS / IEC norms — Pasca *)
PROGRAM PRG_ASSEMBLY_LINES_Control
VAR
(* State Machine Variables *)
eState : E_ASSEMBLY_LINES_States := IDLE;
bEnable : BOOL := FALSE;
bFaultActive : BOOL := FALSE;
(* Timers *)
tonDebounce : TON;
tonProcessTimeout : TON;
tonFeedbackCheck : TON;
(* Counters *)
ctuCycleCounter : CTU;
(* Process Variables *)
rVisionsystems : REAL := 0.0;
rServomotors : REAL := 0.0;
rSetpoint : REAL := 100.0; (* Illustrative value; replace with a reviewed requirement *)
END_VAR
VAR CONSTANT
(* Manufacturing Process Parameters *)
C_DEBOUNCE_TIME : TIME := T#500MS;
C_PROCESS_TIMEOUT : TIME := T#30S; (* Illustrative value; verify for the process *)
C_BATCH_SIZE : INT := 50; (* Illustrative value; replace with a reviewed requirement *)
END_VAR
(* Input Conditioning *)
tonDebounce(IN := bStartButton, PT := C_DEBOUNCE_TIME);
bEnable := tonDebounce.Q AND NOT bEmergencyStop AND bSafetyOK;
(* Main State Machine - Pattern: InoProShop state machines typically use *)
CASE eState OF
IDLE:
rServomotors := 0.0;
ctuCycleCounter(RESET := TRUE);
IF bEnable AND rVisionsystems > 0.0 THEN
eState := STARTING;
END_IF;
STARTING:
(* Ramp up output - Gradual start *)
rServomotors := MIN(rServomotors + 5.0, rSetpoint);
IF rServomotors >= rSetpoint THEN
eState := RUNNING;
END_IF;
RUNNING:
(* Assembly Lines active - Assembly line control systems coordinate the seque *)
tonProcessTimeout(IN := TRUE, PT := C_PROCESS_TIMEOUT);
ctuCycleCounter(CU := bCyclePulse, PV := C_BATCH_SIZE);
IF ctuCycleCounter.Q THEN
eState := COMPLETE;
ELSIF tonProcessTimeout.Q THEN
bFaultActive := TRUE;
eState := FAULT;
END_IF;
COMPLETE:
rServomotors := 0.0;
(* Log production data - InoProShop on AM600 / H5U supports SD-card logging via library FBs, plus OPC UA streaming for cloud / on-premises historians. Inovance HMIs add CSV logging at HMI tier. AutoShop projects rely on HMI-tier logging exclusively. *)
eState := IDLE;
FAULT:
rServomotors := 0.0;
(* InoProShop alarms are typically defined in the visualisation alarm-configuration page with severity, latching, and acknowledgement behaviour configured per alarm. The runtime maintains active and historical alarm lists. AutoShop projects fall back to M-flag banks with HMI-side alarm logging. *)
IF bFaultReset AND NOT bEmergencyStop THEN
bFaultActive := FALSE;
eState := IDLE;
END_IF;
END_CASE;
(* Safety Override - Always executes *)
IF bEmergencyStop OR NOT bSafetyOK THEN
rServomotors := 0.0;
eState := FAULT;
bFaultActive := TRUE;
END_IF;
END_PROGRAMCode Explanation:
- 1.Enumerated state machine (InoProShop state machines typically use IEC SFC steps with action blocks per step, or a state-enum-and-CASE pattern in Structured Text. SFC dominates production-line sequencers; CASE patterns dominate axis-control state and recipe-routing logic. AutoShop projects fall back to FX-style SFC step memory (S0..S511) or D-register integer state.) for clear Assembly Lines sequence control
- 2.Constants use clearly marked illustrative values that must be replaced with reviewed project requirements
- 3.Input conditioning with debounce timer prevents false triggers in industrial environment
- 4.STARTING state implements soft-start ramp - prevents mechanical shock
- 5.Process timeout detection flags a possible stuck condition for investigation
- 6.The final override illustrates a software permissive only; it is not a safety-rated function and must not replace a validated safety system
Best Practices
- ✓Follow Inovance naming conventions: On InoProShop projects, conventions follow CODESYS / IEC norms — PascalCase for
- ✓Inovance function design: InoProShop strongly favours function-block reuse via the Library Manager — Inova
- ✓Data organization: InoProShop uses GVLs and persistent variables for shared data. AutoShop uses D /
- ✓Structured Text: Use meaningful variable names with consistent naming conventions
- ✓Structured Text: Initialize all variables at declaration to prevent undefined behavior
- ✓Structured Text: Use enumerated types for state machines instead of magic numbers
- ✓Assembly Lines: Implement operation-level process data logging
- ✓Assembly Lines: Use standard station control template for consistency
- ✓Assembly Lines: Add pre-emptive parts request to avoid stock-out
- ✓Debug with InoProShop / AutoShop: Use InoProShop's online mode to set breakpoints in POUs and step throu
- ✓Safety: Two-hand start buttons for manual stations
- ✓Use a compatible simulator or isolated test rig to test Assembly Lines logic before deployment
Common Pitfalls to Avoid
- ⚠Structured Text: Using = instead of := for assignment (= is comparison)
- ⚠Structured Text: Forgetting semicolons at end of statements
- ⚠Structured Text: Integer division truncation - use REAL for decimal results
- ⚠Inovance common error: EtherCAT slave order mismatch after physical re-cabling — slave addressing break
- ⚠Assembly Lines: Balancing work content across stations for consistent cycle time
- ⚠Assembly Lines: Handling product variants with different operations
- ⚠Neglecting to validate Part presence sensors for component verification leads to control errors
- ⚠Insufficient comments make Structured Text programs unmaintainable over time
Related Certifications
Applying Structured Text to Assembly Lines using Inovance InoProShop / AutoShop requires understanding the platform, the process, and the project's acceptance criteria. This guide has covered implementation structure, an illustrative code example, verification practices, and common pitfalls for a intermediate to advanced Assembly Lines exercise.
Use the practices outlined here to create a design that can be reviewed and tested. Define performance targets in the project requirements and confirm them with repeatable measurements.
Next Steps:
1. Check Sources: Read the current InoProShop / AutoShop help, controller manual, release notes, and relevant standards
2. Practice Safely: Adapt the example in a simulator or isolated training setup
3. Review: Have the I/O map, state behavior, faults, and recovery steps reviewed
4. Test: Record normal, boundary, fault, restart, and communications test results
Structured Text Foundation:
Structured Text (ST) is a high-level, text-based programming language defined in IEC 61131-3. It resembles Pascal and provides powerful constructs for...
Project duration depends on scope, reviews, hardware availability, software and firmware versions, testing, commissioning, and site constraints. Remember: Implement operation-level process data logging
For further learning, explore related topics including Recipe management, Electronics manufacturing, and Inovance platform-specific features for Assembly Lines optimization.