Inovance Structured Text for Bottle Filling: Complete Programming Guide

Learning to implement Structured Text for Bottle Filling using Inovance's InoProShop / AutoShop is a useful skill for PLC programmers working in Packaging. This guide walks through the fundamentals with clear explanations and an illustrative example that you can adapt to a simulator or test bench.

The example uses Inovance terminology and references controller families such as AM600 and AM610. Confirm the exact instructions, data types, firmware requirements, and licensing in the current vendor documentation before choosing hardware or deploying a project.

The Structured Text approach is particularly well-suited for Bottle Filling because complex calculations, data manipulation, advanced control algorithms, and when code reusability is important. This combination allows you to leverage powerful for complex logic while managing the typical challenges of Bottle Filling, including precise fill volume and high-speed operation.

Throughout this guide, you'll find step-by-step implementation guidance, an illustrative code example, and a verification checklist specific to Packaging. Whether you're programming your first Bottle Filling exercise or transitioning from another PLC platform, use the material as a starting point and validate it in your exact InoProShop / AutoShop version and controller environment.

Inovance InoProShop / AutoShop for Bottle Filling

InoProShop / AutoShop is a programming environment associated with Inovance controller families such as AM600, AM610, H5U. This guide uses Structured Text terminology from the supplied guide dataset, but controller capabilities and language support can change by model, firmware, software edition, and license.

Verify Before You Start:

The selected controller supports the required Structured Text constructs

The project version matches the installed InoProShop / AutoShop release

Required communications, motion, safety, and simulation options are licensed

Firmware and device-description files are compatible with the project

The vendor manuals used for the design match the exact hardware revision

Application Planning:

For a Bottle Filling exercise, map the required inputs and outputs before writing logic. The example considers 5 sensor types, including Level sensors, Flow meters, Pressure sensors, and 5 actuator types.

Control Equipment for Bottle Filling:

Filling nozzles (gravity, pressure, vacuum)

Product tanks with level control

CIP (clean-in-place) systems

Cap feeding and sorting equipment

Controller-family references used in this guide include:

AM600: Confirm CPU, I/O, memory, communications, and Structured Text support in the current selection guide

AM610: Confirm CPU, I/O, memory, communications, and Structured Text support in the current selection guide

H5U: Confirm CPU, I/O, memory, communications, and Structured Text support in the current selection guide

AC800: Confirm CPU, I/O, memory, communications, and Structured Text support in the current selection guide

Hardware Selection Checklist:

Count local and remote I/O, including planned expansion

Measure the required task and communications update rates

Identify memory, data-retention, diagnostics, and cybersecurity requirements

Treat safety functions as a separate, standards-led design activity

Confirm lifecycle status, regional availability, licensing, and support

Source and Validation Note:

This page does not represent a vendor certification or a hardware acceptance test. Use current Inovance manuals, release notes, and safety documentation as the authority for product-specific behavior. Validate adapted logic in a simulator or isolated test setup before connecting it to equipment.

Investment Considerations:

For Bottle Filling projects, compare hardware, software licensing, training, engineering, test equipment, commissioning, spares, and ongoing support. Obtain current pricing and lifecycle information directly from the vendor or an authorized regional supplier.

Understanding Structured Text for Bottle Filling

Structured Text (ST) is a high-level, text-based programming language defined in IEC 61131-3. It resembles Pascal and provides powerful constructs for complex algorithms, calculations, and data manipulation.

Execution Model:

Code executes sequentially from top to bottom within each program unit. Variables maintain state between scan cycles unless explicitly reset.

Core Advantages for Bottle Filling:

Powerful for complex logic: Critical for Bottle Filling when handling intermediate to advanced control logic

Excellent code reusability: Critical for Bottle Filling when handling intermediate to advanced control logic

Compact code representation: Critical for Bottle Filling when handling intermediate to advanced control logic

Good for algorithms and calculations: Critical for Bottle Filling when handling intermediate to advanced control logic

Familiar to software developers: Critical for Bottle Filling when handling intermediate to advanced control logic

Why Structured Text Fits Bottle Filling:

Bottle Filling systems in Packaging typically involve:

Sensors: Bottle presence sensors (fiber optic or inductive) for container detection, Level sensors (capacitive, ultrasonic, or optical) for fill detection, Load cells for gravimetric (weight-based) filling

Actuators: Servo-driven filling valves for precise flow control, Pneumatic pinch valves for on/off flow control, Bottle handling star wheels and timing screws

Complexity: Intermediate to Advanced with challenges including Preventing dripping and stringing after fill cutoff

Programming Fundamentals in Structured Text:

Variables:
- declaration: VAR / VAR_INPUT / VAR_OUTPUT / VAR_IN_OUT / VAR_GLOBAL sections
- initialization: Variables can be initialized at declaration: Counter : INT := 0;
- constants: VAR CONSTANT section for read-only values

Operators:
- arithmetic: + - * / MOD (modulo)
- comparison: = <> < > <= >=
- logical: AND OR XOR NOT

ControlStructures:
- if: IF condition THEN statements; ELSIF condition THEN statements; ELSE statements; END_IF;
- case: CASE selector OF value1: statements; value2: statements; ELSE statements; END_CASE;
- for: FOR index := start TO end BY step DO statements; END_FOR;

Best Practices for Structured Text:

Use meaningful variable names with consistent naming conventions

Initialize all variables at declaration to prevent undefined behavior

Use enumerated types for state machines instead of magic numbers

Break complex expressions into intermediate variables for readability

Use functions for reusable calculations and function blocks for stateful operations

Common Mistakes to Avoid:

Using = instead of := for assignment (= is comparison)

Forgetting semicolons at end of statements

Integer division truncation - use REAL for decimal results

Infinite loops from incorrect WHILE/REPEAT conditions

Typical Applications:

1. PID control: Directly applicable to Bottle Filling
2. Recipe management: Related control patterns
3. Statistical calculations: Related control patterns
4. Data logging: Related control patterns

Understanding these fundamentals prepares you to implement effective Structured Text solutions for Bottle Filling using Inovance InoProShop / AutoShop.

Implementing Bottle Filling with Structured Text

Bottle filling control systems manage the precise dispensing of liquids into containers at high speeds while maintaining accuracy and preventing spillage. PLCs coordinate container handling, fill control, capping, and quality inspection in an integrated packaging line.

This walkthrough demonstrates practical implementation using Inovance InoProShop / AutoShop and Structured Text programming.

System Requirements:

A typical Bottle Filling implementation includes:

Input Devices (Sensors):
1. Bottle presence sensors (fiber optic or inductive) for container detection: Critical for monitoring system state
2. Level sensors (capacitive, ultrasonic, or optical) for fill detection: Critical for monitoring system state
3. Load cells for gravimetric (weight-based) filling: Critical for monitoring system state
4. Flow meters (magnetic or mass flow) for volumetric filling: Critical for monitoring system state
5. Encoder feedback for rotary filler position: Critical for monitoring system state

Output Devices (Actuators):
1. Servo-driven filling valves for precise flow control: Primary control output
2. Pneumatic pinch valves for on/off flow control: Supporting control function
3. Bottle handling star wheels and timing screws: Supporting control function
4. Capping chuck drives (servo or pneumatic): Supporting control function
5. Torque limiters for cap tightening: Supporting control function

Control Equipment:

Filling nozzles (gravity, pressure, vacuum)

Product tanks with level control

CIP (clean-in-place) systems

Cap feeding and sorting equipment

Control Strategies for Bottle Filling:

1. Primary Control: Automated bottle filling and capping systems using PLCs for precise volume control, speed optimization, and quality assurance.
2. Safety Interlocks: Preventing Precise fill volume
3. Error Recovery: Handling High-speed operation

Implementation Steps:

Step 1: Characterize product flow properties (viscosity, foaming, temperature sensitivity)

In InoProShop / AutoShop, characterize product flow properties (viscosity, foaming, temperature sensitivity).

Step 2: Determine fill method based on accuracy requirements and product type

In InoProShop / AutoShop, determine fill method based on accuracy requirements and product type.

Step 3: Design container handling for smooth, jam-free operation

In InoProShop / AutoShop, design container handling for smooth, jam-free operation.

Step 4: Implement fill sequence with proper valve timing and deceleration

In InoProShop / AutoShop, implement fill sequence with proper valve timing and deceleration.

Step 5: Add bulk/dribble transition logic for gravimetric filling

In InoProShop / AutoShop, add bulk/dribble transition logic for gravimetric filling.

Step 6: Program calibration routines for automatic fill adjustment

In InoProShop / AutoShop, program calibration routines for automatic fill adjustment.

Inovance Function Design:

InoProShop strongly favours function-block reuse via the Library Manager — Inovance ships standard libraries for motion, drives, HMI, OPC UA, and industry-specific applications (lithium-battery, EV, elevator). AutoShop reuse is open-coded via P-label subroutines. OEM machine-builders increasingly default to InoProShop / AM600 to access the FB libraries.

Common Challenges and Solutions:

1. Preventing dripping and stringing after fill cutoff

Solution: Structured Text addresses this through Powerful for complex logic.

2. Handling foaming products that give false level readings

Solution: Structured Text addresses this through Excellent code reusability.

3. Maintaining accuracy at high speeds

Solution: Structured Text addresses this through Compact code representation.

4. Synchronizing multi-head rotary fillers

Solution: Structured Text addresses this through Good for algorithms and calculations.

Safety Considerations:

Guarding around rotating components

Interlocked access doors with safe stop

Bottle breakage detection and containment

Overpressure protection for pressure filling

Chemical handling safety for cleaning solutions

Performance Metrics:

Task and I/O timing: Record minimum, average, and maximum values under a defined test load

Accuracy: Define an acceptable tolerance and compare it with calibrated reference measurements

Throughput: Count completed cycles over a fixed interval and record rejected or incomplete cycles

Fault response: Measure detection, safe-state, alarm, and recovery behavior for each test case

Resource use: Record memory, communications load, and diagnostic-buffer behavior

Inovance Diagnostic Tools:

InoProShop online mode with full POU monitoring and breakpoint debug,EtherCAT diagnostics page with topology and slave status,Trace tool for analogue / motion signal capture,OPC UA server diagnostics page,Modbus communication trace utility,AutoShop online mode for legacy AC800 / Easy series,Inovance HMI integrated diagnostics for HMI-PLC binding faults,Servo-drive panel diagnostics with InoProShop drive-monitor view,EtherCAT slave-firmware update tool,Project compare tool for change tracking

Use the monitoring and diagnostic functions available in your InoProShop / AutoShop version, and record the software, firmware, hardware, workload, and test procedure with every result.

Inovance Structured Text Example for Bottle Filling

Illustrative Structured Text example for Bottle Filling using Inovance terminology. Adapt the syntax to your InoProShop / AutoShop release, compile it, and verify it in an isolated test environment before use on equipment.

(* Inovance InoProShop / AutoShop - Bottle Filling Control *)
(* Structured Text Implementation for Packaging *)
(* On InoProShop projects, conventions follow CODESYS / IEC norms — Pasca *)

PROGRAM PRG_BOTTLE_FILLING_Control

VAR
    (* State Machine Variables *)
    eState : E_BOTTLE_FILLING_States := IDLE;
    bEnable : BOOL := FALSE;
    bFaultActive : BOOL := FALSE;

    (* Timers *)
    tonDebounce : TON;
    tonProcessTimeout : TON;
    tonFeedbackCheck : TON;

    (* Counters *)
    ctuCycleCounter : CTU;

    (* Process Variables *)
    rLevelsensors : REAL := 0.0;
    rServomotors : REAL := 0.0;
    rSetpoint : REAL := 100.0; (* Illustrative value; replace with a reviewed requirement *)
END_VAR

VAR CONSTANT
    (* Packaging Process Parameters *)
    C_DEBOUNCE_TIME : TIME := T#500MS;
    C_PROCESS_TIMEOUT : TIME := T#30S; (* Illustrative value; verify for the process *)
    C_BATCH_SIZE : INT := 50; (* Illustrative value; replace with a reviewed requirement *)
END_VAR

(* Input Conditioning *)
tonDebounce(IN := bStartButton, PT := C_DEBOUNCE_TIME);
bEnable := tonDebounce.Q AND NOT bEmergencyStop AND bSafetyOK;

(* Main State Machine - Pattern: InoProShop state machines typically use  *)
CASE eState OF
    IDLE:
        rServomotors := 0.0;
        ctuCycleCounter(RESET := TRUE);
        IF bEnable AND rLevelsensors > 0.0 THEN
            eState := STARTING;
        END_IF;

    STARTING:
        (* Ramp up output - Gradual start *)
        rServomotors := MIN(rServomotors + 5.0, rSetpoint);
        IF rServomotors >= rSetpoint THEN
            eState := RUNNING;
        END_IF;

    RUNNING:
        (* Bottle Filling active - Bottle filling control systems manage the precise  *)
        tonProcessTimeout(IN := TRUE, PT := C_PROCESS_TIMEOUT);
        ctuCycleCounter(CU := bCyclePulse, PV := C_BATCH_SIZE);

        IF ctuCycleCounter.Q THEN
            eState := COMPLETE;
        ELSIF tonProcessTimeout.Q THEN
            bFaultActive := TRUE;
            eState := FAULT;
        END_IF;

    COMPLETE:
        rServomotors := 0.0;
        (* Log production data - InoProShop on AM600 / H5U supports SD-card logging via library FBs, plus OPC UA streaming for cloud / on-premises historians. Inovance HMIs add CSV logging at HMI tier. AutoShop projects rely on HMI-tier logging exclusively. *)
        eState := IDLE;

    FAULT:
        rServomotors := 0.0;
        (* InoProShop alarms are typically defined in the visualisation alarm-configuration page with severity, latching, and acknowledgement behaviour configured per alarm. The runtime maintains active and historical alarm lists. AutoShop projects fall back to M-flag banks with HMI-side alarm logging. *)
        IF bFaultReset AND NOT bEmergencyStop THEN
            bFaultActive := FALSE;
            eState := IDLE;
        END_IF;
END_CASE;

(* Safety Override - Always executes *)
IF bEmergencyStop OR NOT bSafetyOK THEN
    rServomotors := 0.0;
    eState := FAULT;
    bFaultActive := TRUE;
END_IF;

END_PROGRAM

Code Explanation:

1.Enumerated state machine (InoProShop state machines typically use IEC SFC steps with action blocks per step, or a state-enum-and-CASE pattern in Structured Text. SFC dominates production-line sequencers; CASE patterns dominate axis-control state and recipe-routing logic. AutoShop projects fall back to FX-style SFC step memory (S0..S511) or D-register integer state.) for clear Bottle Filling sequence control
2.Constants use clearly marked illustrative values that must be replaced with reviewed project requirements
3.Input conditioning with debounce timer prevents false triggers in industrial environment
4.STARTING state implements soft-start ramp - prevents mechanical shock
5.Process timeout detection flags a possible stuck condition for investigation
6.The final override illustrates a software permissive only; it is not a safety-rated function and must not replace a validated safety system

Best Practices

✓Follow Inovance naming conventions: On InoProShop projects, conventions follow CODESYS / IEC norms — PascalCase for
✓Inovance function design: InoProShop strongly favours function-block reuse via the Library Manager — Inova
✓Data organization: InoProShop uses GVLs and persistent variables for shared data. AutoShop uses D /
✓Structured Text: Use meaningful variable names with consistent naming conventions
✓Structured Text: Initialize all variables at declaration to prevent undefined behavior
✓Structured Text: Use enumerated types for state machines instead of magic numbers
✓Bottle Filling: Use minimum 10 readings for statistical fill tracking
✓Bottle Filling: Implement automatic re-zero of scales at regular intervals
✓Bottle Filling: Provide separate parameters for each product recipe
✓Debug with InoProShop / AutoShop: Use InoProShop's online mode to set breakpoints in POUs and step throu
✓Safety: Guarding around rotating components
✓Use a compatible simulator or isolated test rig to test Bottle Filling logic before deployment

Common Pitfalls to Avoid

⚠Structured Text: Using = instead of := for assignment (= is comparison)
⚠Structured Text: Forgetting semicolons at end of statements
⚠Structured Text: Integer division truncation - use REAL for decimal results
⚠Inovance common error: EtherCAT slave order mismatch after physical re-cabling — slave addressing break
⚠Bottle Filling: Preventing dripping and stringing after fill cutoff
⚠Bottle Filling: Handling foaming products that give false level readings
⚠Neglecting to validate Bottle presence sensors (fiber optic or inductive) for container detection leads to control errors
⚠Insufficient comments make Structured Text programs unmaintainable over time

Related Certifications

🏆Inovance Certified Engineer

🏆InoProShop / AutoShop training certificates

🏆EV / Lithium Battery automation specialist tracks

🏆Advanced Inovance Programming Certification

Applying Structured Text to Bottle Filling using Inovance InoProShop / AutoShop requires understanding the platform, the process, and the project's acceptance criteria. This guide has covered implementation structure, an illustrative code example, verification practices, and common pitfalls for a intermediate to advanced Bottle Filling exercise.

Use the practices outlined here to create a design that can be reviewed and tested. Define performance targets in the project requirements and confirm them with repeatable measurements.

Next Steps:

1. Check Sources: Read the current InoProShop / AutoShop help, controller manual, release notes, and relevant standards
2. Practice Safely: Adapt the example in a simulator or isolated training setup
3. Review: Have the I/O map, state behavior, faults, and recovery steps reviewed
4. Test: Record normal, boundary, fault, restart, and communications test results

Structured Text Foundation:

Structured Text (ST) is a high-level, text-based programming language defined in IEC 61131-3. It resembles Pascal and provides powerful constructs for...

Project duration depends on scope, reviews, hardware availability, software and firmware versions, testing, commissioning, and site constraints. Remember: Use minimum 10 readings for statistical fill tracking

For further learning, explore related topics including Recipe management, Pharmaceutical liquid filling, and Inovance platform-specific features for Bottle Filling optimization.