Learning to implement Sequential Function Charts (SFC) for HVAC Control using Unitronics's VisiLogic / UniLogic is a useful skill for PLC programmers working in Building Automation. This guide walks through the fundamentals with clear explanations and an illustrative example that you can adapt to a simulator or test bench.
The example uses Unitronics terminology and references controller families such as Jazz 2 and Samba 7". Confirm the exact instructions, data types, firmware requirements, and licensing in the current vendor documentation before choosing hardware or deploying a project.
The Sequential Function Charts (SFC) approach is particularly well-suited for HVAC Control because batch processes, step-by-step operations, state machines, and complex sequential control. This combination allows you to leverage perfect for sequential processes while managing the typical challenges of HVAC Control, including energy optimization and zone control coordination.
Throughout this guide, you'll find step-by-step implementation guidance, an illustrative code example, and a verification checklist specific to Building Automation. Whether you're programming your first HVAC Control exercise or transitioning from another PLC platform, use the material as a starting point and validate it in your exact VisiLogic / UniLogic version and controller environment.
Unitronics VisiLogic / UniLogic for HVAC Control
VisiLogic / UniLogic is a programming environment associated with Unitronics controller families such as Jazz 2, Samba 7", Vision V350. This guide uses Sequential Function Charts (SFC) terminology from the supplied guide dataset, but controller capabilities and language support can change by model, firmware, software edition, and license.
Verify Before You Start:
- The selected controller supports the required Sequential Function Charts (SFC) constructs
- The project version matches the installed VisiLogic / UniLogic release
- Required communications, motion, safety, and simulation options are licensed
- Firmware and device-description files are compatible with the project
- The vendor manuals used for the design match the exact hardware revision
Application Planning:
For a HVAC Control exercise, map the required inputs and outputs before writing logic. The example considers 5 sensor types, including Temperature sensors (RTD, Thermocouple), Humidity sensors, Pressure sensors, and 5 actuator types.
Control Equipment for HVAC Control:
- Air handling units (AHUs) with supply and return fans
- Variable air volume (VAV) boxes with reheat
- Chillers and cooling towers for central cooling
- Boilers and heat exchangers for heating
Controller-family references used in this guide include:
- Jazz 2: Confirm CPU, I/O, memory, communications, and Sequential Function Charts (SFC) support in the current selection guide
- Samba 7": Confirm CPU, I/O, memory, communications, and Sequential Function Charts (SFC) support in the current selection guide
- Vision V350: Confirm CPU, I/O, memory, communications, and Sequential Function Charts (SFC) support in the current selection guide
- Vision V570: Confirm CPU, I/O, memory, communications, and Sequential Function Charts (SFC) support in the current selection guide
Hardware Selection Checklist:
- Count local and remote I/O, including planned expansion
- Measure the required task and communications update rates
- Identify memory, data-retention, diagnostics, and cybersecurity requirements
- Treat safety functions as a separate, standards-led design activity
- Confirm lifecycle status, regional availability, licensing, and support
Source and Validation Note:
This page does not represent a vendor certification or a hardware acceptance test. Use current Unitronics manuals, release notes, and safety documentation as the authority for product-specific behavior. Validate adapted logic in a simulator or isolated test setup before connecting it to equipment.
Investment Considerations:
For HVAC Control projects, compare hardware, software licensing, training, engineering, test equipment, commissioning, spares, and ongoing support. Obtain current pricing and lifecycle information directly from the vendor or an authorized regional supplier.
Understanding Sequential Function Charts (SFC) for HVAC Control
Sequential Function Chart (SFC) is a graphical language for programming sequential processes. It models systems as a series of steps connected by transitions, ideal for batch processes and machine sequences.
Execution Model:
Only active steps execute their actions. Transitions define conditions for moving between steps. Multiple steps can be active simultaneously in parallel branches.
Core Advantages for HVAC Control:
- Perfect for sequential processes: Critical for HVAC Control when handling intermediate control logic
- Clear visualization of process flow: Critical for HVAC Control when handling intermediate control logic
- Easy to understand process steps: Critical for HVAC Control when handling intermediate control logic
- Good for batch operations: Critical for HVAC Control when handling intermediate control logic
- Simplifies complex sequences: Critical for HVAC Control when handling intermediate control logic
Why Sequential Function Charts (SFC) Fits HVAC Control:
HVAC Control systems in Building Automation typically involve:
- Sensors: Temperature sensors (RTD, thermistors, thermocouples) for zone and supply/return monitoring, Humidity sensors (capacitive or resistive) for moisture control, CO2 sensors for demand-controlled ventilation
- Actuators: Variable frequency drives (VFDs) for fan and pump speed control, Modulating control valves (2-way and 3-way) for heating/cooling coils, Damper actuators (0-10V or 4-20mA) for air flow control
- Complexity: Intermediate with challenges including Tuning PID loops for slow thermal processes without causing oscillation
Control Strategies for HVAC Control:
- zoneTemperature: Cascaded PID control where zone temperature error calculates supply air temperature setpoint, which then modulates cooling/heating valves or VAV damper position
- supplyAirTemperature: PID control of cooling coil valve, heating coil valve, or economizer dampers to maintain supply air temperature setpoint
- staticPressure: PID control of supply fan VFD speed to maintain duct static pressure setpoint for proper VAV box operation
Programming Fundamentals in Sequential Function Charts (SFC):
Steps:
- initialStep: Double-bordered box - starting point of sequence, active on program start
- normalStep: Single-bordered box - becomes active when preceding transition fires
- actions: Associated code that executes while step is active
Transitions:
- condition: Boolean expression that must be TRUE to advance
- firing: Transition fires when preceding step is active AND condition is TRUE
- priority: In selective branches, transitions are evaluated in defined order
ActionQualifiers:
- N: Non-stored - executes while step is active
- S: Set - sets output TRUE on step entry, remains TRUE
- R: Reset - sets output FALSE on step entry
Best Practices for Sequential Function Charts (SFC):
- Start with a clear process flow diagram before implementing SFC
- Use descriptive step names indicating what happens (e.g., Filling, Heating)
- Keep transition conditions simple - complex logic goes in action code
- Implement timeout transitions to prevent stuck sequences
- Always provide a path back to initial step for reset/restart
Common Mistakes to Avoid:
- Forgetting to include stop/abort transitions for emergency handling
- Creating deadlocks where no transition can fire
- Not handling the case where transition conditions never become TRUE
- Using S (Set) actions without corresponding R (Reset) actions
Typical Applications:
1. Bottle filling: Directly applicable to HVAC Control
2. Assembly sequences: Related control patterns
3. Material handling: Related control patterns
4. Batch mixing: Related control patterns
Understanding these fundamentals prepares you to implement effective Sequential Function Charts (SFC) solutions for HVAC Control using Unitronics VisiLogic / UniLogic.
Implementing HVAC Control with Sequential Function Charts (SFC)
HVAC (Heating, Ventilation, and Air Conditioning) control systems use PLCs to regulate temperature, humidity, and air quality in buildings and industrial facilities. These systems balance comfort, energy efficiency, and equipment longevity through sophisticated control algorithms.
This walkthrough demonstrates practical implementation using Unitronics VisiLogic / UniLogic and Sequential Function Charts (SFC) programming.
System Requirements:
A typical HVAC Control implementation includes:
Input Devices (Sensors):
1. Temperature sensors (RTD, thermistors, thermocouples) for zone and supply/return monitoring: Critical for monitoring system state
2. Humidity sensors (capacitive or resistive) for moisture control: Critical for monitoring system state
3. CO2 sensors for demand-controlled ventilation: Critical for monitoring system state
4. Pressure sensors for duct static pressure and building pressurization: Critical for monitoring system state
5. Occupancy sensors (PIR, ultrasonic) for demand-based operation: Critical for monitoring system state
Output Devices (Actuators):
1. Variable frequency drives (VFDs) for fan and pump speed control: Primary control output
2. Modulating control valves (2-way and 3-way) for heating/cooling coils: Supporting control function
3. Damper actuators (0-10V or 4-20mA) for air flow control: Supporting control function
4. Compressor contactors and staging relays: Supporting control function
5. Humidifier and dehumidifier control outputs: Supporting control function
Control Equipment:
- Air handling units (AHUs) with supply and return fans
- Variable air volume (VAV) boxes with reheat
- Chillers and cooling towers for central cooling
- Boilers and heat exchangers for heating
Control Strategies for HVAC Control:
- zoneTemperature: Cascaded PID control where zone temperature error calculates supply air temperature setpoint, which then modulates cooling/heating valves or VAV damper position
- supplyAirTemperature: PID control of cooling coil valve, heating coil valve, or economizer dampers to maintain supply air temperature setpoint
- staticPressure: PID control of supply fan VFD speed to maintain duct static pressure setpoint for proper VAV box operation
Implementation Steps:
Step 1: Document all zones with temperature requirements and occupancy schedules
In VisiLogic / UniLogic, document all zones with temperature requirements and occupancy schedules.
Step 2: Create I/O list with all sensors, actuators, and their signal types
In VisiLogic / UniLogic, create i/o list with all sensors, actuators, and their signal types.
Step 3: Define setpoints, operating limits, and alarm thresholds
In VisiLogic / UniLogic, define setpoints, operating limits, and alarm thresholds.
Step 4: Implement zone temperature control loops with anti-windup
In VisiLogic / UniLogic, implement zone temperature control loops with anti-windup.
Step 5: Program equipment sequencing with proper lead-lag rotation
In VisiLogic / UniLogic, program equipment sequencing with proper lead-lag rotation.
Step 6: Add economizer logic with lockouts for high humidity conditions
In VisiLogic / UniLogic, add economizer logic with lockouts for high humidity conditions.
Unitronics Function Design:
Function block design in Unitronics uses user-defined FBs in UniLogic (more limited in VisiLogic). Extensive vendor-provided helper FBs cover common tasks (PID, motion, communication, HMI utilities). OEM machine builders typically maintain private FB libraries for their common machine patterns, though code reuse is less mature than in mainstream PLC ecosystems.
Common Challenges and Solutions:
1. Tuning PID loops for slow thermal processes without causing oscillation
- Solution: Sequential Function Charts (SFC) addresses this through Perfect for sequential processes.
2. Preventing simultaneous heating and cooling which wastes energy
- Solution: Sequential Function Charts (SFC) addresses this through Clear visualization of process flow.
3. Managing zone interactions in open-plan spaces
- Solution: Sequential Function Charts (SFC) addresses this through Easy to understand process steps.
4. Balancing fresh air requirements with energy efficiency
- Solution: Sequential Function Charts (SFC) addresses this through Good for batch operations.
Safety Considerations:
- Freeze protection for coils with low-limit thermostats and valve positioning
- High-limit safety shutoffs for heating equipment
- Smoke detector integration for fan shutdown and damper closure
- Fire/smoke damper monitoring and control
- Emergency ventilation modes for hazardous conditions
Performance Metrics:
- Task and I/O timing: Record minimum, average, and maximum values under a defined test load
- Accuracy: Define an acceptable tolerance and compare it with calibrated reference measurements
- Throughput: Count completed cycles over a fixed interval and record rejected or incomplete cycles
- Fault response: Measure detection, safe-state, alarm, and recovery behavior for each test case
- Resource use: Record memory, communications load, and diagnostic-buffer behavior
Unitronics Diagnostic Tools:
UniLogic (current) and VisiLogic (legacy) integrated debuggers with breakpoints,Built-in simulator covering PLC logic, HMI screens, alarms, recipes, and data tables,Web visualisation for UniStream — remote HMI viewing without additional software,SD card logging with PC-side export tools for offline trend analysis,Modbus RTU/TCP transaction logging built into the IDE,Controller status monitor — CPU load, scan time, memory usage,HMI event logger capturing operator actions for audit purposes,CAN bus diagnostic tools for CANopen-equipped models,Remote support tool — Unitronics' own screen-sharing for technical support,User community forum with active troubleshooting discussions
Use the monitoring and diagnostic functions available in your VisiLogic / UniLogic version, and record the software, firmware, hardware, workload, and test procedure with every result.
Unitronics Sequential Function Charts (SFC) Example for HVAC Control
Illustrative Sequential Function Charts (SFC) example for HVAC Control using Unitronics terminology. Adapt the syntax to your VisiLogic / UniLogic release, compile it, and verify it in an isolated test environment before use on equipment.
// Unitronics VisiLogic / UniLogic - HVAC Control Control
// Sequential Function Charts (SFC) Implementation for Building Automation
// Unitronics projects use IDE-managed tag names rather than ra
// ============================================
// Variable Declarations
// ============================================
VAR
bEnable : BOOL := FALSE;
bEmergencyStop : BOOL := FALSE;
rTemperaturesensorsRTDThermocouple : REAL;
rVariablefrequencydrivesVFDs : REAL;
END_VAR
// ============================================
// Input Conditioning - Temperature sensors (RTD, thermistors, thermocouples) for zone and supply/return monitoring
// ============================================
// Standard input processing
IF rTemperaturesensorsRTDThermocouple > 0.0 THEN
bEnable := TRUE;
END_IF;
// ============================================
// Safety Interlock - Freeze protection for coils with low-limit thermostats and valve positioning
// ============================================
IF bEmergencyStop THEN
rVariablefrequencydrivesVFDs := 0.0;
bEnable := FALSE;
END_IF;
// ============================================
// Main HVAC Control Control Logic
// ============================================
IF bEnable AND NOT bEmergencyStop THEN
// HVAC (Heating, Ventilation, and Air Conditioning) control sy
rVariablefrequencydrivesVFDs := rTemperaturesensorsRTDThermocouple * 1.0; (* Illustrative scaling only *)
// Process monitoring
// Add specific control logic here
ELSE
rVariablefrequencydrivesVFDs := 0.0;
END_IF;Code Explanation:
- 1.Sequential Function Charts (SFC) structure organized for a HVAC Control training example
- 2.Input conditioning handles Temperature sensors (RTD, thermistors, thermocouples) for zone and supply/return monitoring signals
- 3.Safety interlock ensures Freeze protection for coils with low-limit thermostats and valve positioning always takes priority
- 4.Main control implements HVAC (Heating, Ventilation, and Air Cond
- 5.Adapt the scan-cycle assumptions to the selected Jazz 2 task configuration and verify them by measurement
Best Practices
- ✓Follow Unitronics naming conventions: Unitronics projects use IDE-managed tag names rather than raw memory addressing.
- ✓Unitronics function design: Function block design in Unitronics uses user-defined FBs in UniLogic (more limi
- ✓Data organization: Unitronics uses its own tag database concept rather than IEC-standard data block
- ✓Sequential Function Charts (SFC): Start with a clear process flow diagram before implementing SFC
- ✓Sequential Function Charts (SFC): Use descriptive step names indicating what happens (e.g., Filling, Heating)
- ✓Sequential Function Charts (SFC): Keep transition conditions simple - complex logic goes in action code
- ✓HVAC Control: Use slow integral action for temperature loops to prevent hunting
- ✓HVAC Control: Implement anti-windup to prevent integral buildup during saturation
- ✓HVAC Control: Add rate limiting to outputs to prevent actuator wear
- ✓Debug with VisiLogic / UniLogic: Use the built-in simulator to reproduce issues before hardware visit
- ✓Safety: Freeze protection for coils with low-limit thermostats and valve positioning
- ✓Use a compatible simulator or isolated test rig to test HVAC Control logic before deployment
Common Pitfalls to Avoid
- ⚠Sequential Function Charts (SFC): Forgetting to include stop/abort transitions for emergency handling
- ⚠Sequential Function Charts (SFC): Creating deadlocks where no transition can fire
- ⚠Sequential Function Charts (SFC): Not handling the case where transition conditions never become TRUE
- ⚠Unitronics common error: VisiLogic-to-UniLogic migration issues — not all projects convert cleanly
- ⚠HVAC Control: Tuning PID loops for slow thermal processes without causing oscillation
- ⚠HVAC Control: Preventing simultaneous heating and cooling which wastes energy
- ⚠Neglecting to validate Temperature sensors (RTD, thermistors, thermocouples) for zone and supply/return monitoring leads to control errors
- ⚠Insufficient comments make Sequential Function Charts (SFC) programs unmaintainable over time
Related Certifications
Applying Sequential Function Charts (SFC) to HVAC Control using Unitronics VisiLogic / UniLogic requires understanding the platform, the process, and the project's acceptance criteria. This guide has covered implementation structure, an illustrative code example, verification practices, and common pitfalls for a intermediate HVAC Control exercise.
Use the practices outlined here to create a design that can be reviewed and tested. Define performance targets in the project requirements and confirm them with repeatable measurements.
Next Steps:
1. Check Sources: Read the current VisiLogic / UniLogic help, controller manual, release notes, and relevant standards
2. Practice Safely: Adapt the example in a simulator or isolated training setup
3. Review: Have the I/O map, state behavior, faults, and recovery steps reviewed
4. Test: Record normal, boundary, fault, restart, and communications test results
Sequential Function Charts (SFC) Foundation:
Sequential Function Chart (SFC) is a graphical language for programming sequential processes. It models systems as a series of steps connected by tran...
Project duration depends on scope, reviews, hardware availability, software and firmware versions, testing, commissioning, and site constraints. Remember: Use slow integral action for temperature loops to prevent hunting
For further learning, explore related topics including Assembly sequences, Hospital environmental systems, and Unitronics platform-specific features for HVAC Control optimization.