Implementing Sequential Function Charts (SFC) for Conveyor Systems using Inovance InoProShop / AutoShop requires translating a control narrative into code, tests, and commissioning checks. This hands-on guide focuses on practical implementation steps, an illustrative code example, and decisions that should be recorded during design review.
The guide uses InoProShop / AutoShop terminology and Sequential Function Charts (SFC) because batch processes, step-by-step operations, state machines, and complex sequential control. Confirm language support for the selected controller and software release, then map the example's 5 sensor inputs and 5 actuator outputs to the project's reviewed I/O list.
Real Conveyor Systems projects in Material Handling face practical challenges including product tracking, speed synchronization, and integration with existing systems. Success requires balancing perfect for sequential processes against limited to sequential operations, while meeting 1-3 weeks project timelines typical for Conveyor Systems implementations.
This guide provides step-by-step implementation guidance, an illustrative example, practical design patterns, and troubleshooting scenarios. Compile and test the adapted logic in an isolated environment, verify fail-safe behavior with the responsible controls and safety reviewers, and complete site acceptance checks before production use.
Inovance InoProShop / AutoShop for Conveyor Systems
InoProShop / AutoShop is a programming environment associated with Inovance controller families such as AM600, AM610, H5U. This guide uses Sequential Function Charts (SFC) terminology from the supplied guide dataset, but controller capabilities and language support can change by model, firmware, software edition, and license.
Verify Before You Start:
- The selected controller supports the required Sequential Function Charts (SFC) constructs
- The project version matches the installed InoProShop / AutoShop release
- Required communications, motion, safety, and simulation options are licensed
- Firmware and device-description files are compatible with the project
- The vendor manuals used for the design match the exact hardware revision
Application Planning:
For a Conveyor Systems exercise, map the required inputs and outputs before writing logic. The example considers 5 sensor types, including Photoelectric sensors, Proximity sensors, Encoders, and 5 actuator types.
Control Equipment for Conveyor Systems:
- Belt conveyors with motor-driven pulleys
- Roller conveyors (powered and gravity)
- Modular plastic belt conveyors
- Accumulation conveyors (zero-pressure, minimum-pressure)
Controller-family references used in this guide include:
- AM600: Confirm CPU, I/O, memory, communications, and Sequential Function Charts (SFC) support in the current selection guide
- AM610: Confirm CPU, I/O, memory, communications, and Sequential Function Charts (SFC) support in the current selection guide
- H5U: Confirm CPU, I/O, memory, communications, and Sequential Function Charts (SFC) support in the current selection guide
- AC800: Confirm CPU, I/O, memory, communications, and Sequential Function Charts (SFC) support in the current selection guide
Hardware Selection Checklist:
- Count local and remote I/O, including planned expansion
- Measure the required task and communications update rates
- Identify memory, data-retention, diagnostics, and cybersecurity requirements
- Treat safety functions as a separate, standards-led design activity
- Confirm lifecycle status, regional availability, licensing, and support
Source and Validation Note:
This page does not represent a vendor certification or a hardware acceptance test. Use current Inovance manuals, release notes, and safety documentation as the authority for product-specific behavior. Validate adapted logic in a simulator or isolated test setup before connecting it to equipment.
Investment Considerations:
For Conveyor Systems projects, compare hardware, software licensing, training, engineering, test equipment, commissioning, spares, and ongoing support. Obtain current pricing and lifecycle information directly from the vendor or an authorized regional supplier.
Understanding Sequential Function Charts (SFC) for Conveyor Systems
Sequential Function Chart (SFC) is a graphical language for programming sequential processes. It models systems as a series of steps connected by transitions, ideal for batch processes and machine sequences.
Execution Model:
Only active steps execute their actions. Transitions define conditions for moving between steps. Multiple steps can be active simultaneously in parallel branches.
Core Advantages for Conveyor Systems:
- Perfect for sequential processes: Critical for Conveyor Systems when handling beginner to intermediate control logic
- Clear visualization of process flow: Critical for Conveyor Systems when handling beginner to intermediate control logic
- Easy to understand process steps: Critical for Conveyor Systems when handling beginner to intermediate control logic
- Good for batch operations: Critical for Conveyor Systems when handling beginner to intermediate control logic
- Simplifies complex sequences: Critical for Conveyor Systems when handling beginner to intermediate control logic
Why Sequential Function Charts (SFC) Fits Conveyor Systems:
Conveyor Systems systems in Material Handling typically involve:
- Sensors: Photoelectric sensors for product detection and zone occupancy, Proximity sensors for metal product detection, Encoders for speed feedback and position tracking
- Actuators: AC motors with VFDs for variable speed control, Motor starters for fixed-speed sections, Pneumatic diverters and pushers for sorting
- Complexity: Beginner to Intermediate with challenges including Maintaining product tracking through merges and diverters
Programming Fundamentals in Sequential Function Charts (SFC):
Steps:
- initialStep: Double-bordered box - starting point of sequence, active on program start
- normalStep: Single-bordered box - becomes active when preceding transition fires
- actions: Associated code that executes while step is active
Transitions:
- condition: Boolean expression that must be TRUE to advance
- firing: Transition fires when preceding step is active AND condition is TRUE
- priority: In selective branches, transitions are evaluated in defined order
ActionQualifiers:
- N: Non-stored - executes while step is active
- S: Set - sets output TRUE on step entry, remains TRUE
- R: Reset - sets output FALSE on step entry
Best Practices for Sequential Function Charts (SFC):
- Start with a clear process flow diagram before implementing SFC
- Use descriptive step names indicating what happens (e.g., Filling, Heating)
- Keep transition conditions simple - complex logic goes in action code
- Implement timeout transitions to prevent stuck sequences
- Always provide a path back to initial step for reset/restart
Common Mistakes to Avoid:
- Forgetting to include stop/abort transitions for emergency handling
- Creating deadlocks where no transition can fire
- Not handling the case where transition conditions never become TRUE
- Using S (Set) actions without corresponding R (Reset) actions
Typical Applications:
1. Bottle filling: Directly applicable to Conveyor Systems
2. Assembly sequences: Related control patterns
3. Material handling: Related control patterns
4. Batch mixing: Related control patterns
Understanding these fundamentals prepares you to implement effective Sequential Function Charts (SFC) solutions for Conveyor Systems using Inovance InoProShop / AutoShop.
Implementing Conveyor Systems with Sequential Function Charts (SFC)
Conveyor control systems manage the movement of materials through manufacturing and distribution facilities. PLCs coordinate multiple conveyor sections, handle product tracking, manage zones and accumulation, and interface with other automated equipment.
This walkthrough demonstrates practical implementation using Inovance InoProShop / AutoShop and Sequential Function Charts (SFC) programming.
System Requirements:
A typical Conveyor Systems implementation includes:
Input Devices (Sensors):
1. Photoelectric sensors for product detection and zone occupancy: Critical for monitoring system state
2. Proximity sensors for metal product detection: Critical for monitoring system state
3. Encoders for speed feedback and position tracking: Critical for monitoring system state
4. Barcode readers and RFID scanners for product identification: Critical for monitoring system state
5. Weight scales for product verification: Critical for monitoring system state
Output Devices (Actuators):
1. AC motors with VFDs for variable speed control: Primary control output
2. Motor starters for fixed-speed sections: Supporting control function
3. Pneumatic diverters and pushers for sorting: Supporting control function
4. Servo drives for precision positioning: Supporting control function
5. Brake modules for controlled stops: Supporting control function
Control Equipment:
- Belt conveyors with motor-driven pulleys
- Roller conveyors (powered and gravity)
- Modular plastic belt conveyors
- Accumulation conveyors (zero-pressure, minimum-pressure)
Control Strategies for Conveyor Systems:
1. Primary Control: Automated material handling using conveyor belts with PLC control for sorting, routing, and tracking products.
2. Safety Interlocks: Preventing Product tracking
3. Error Recovery: Handling Speed synchronization
Implementation Steps:
Step 1: Map conveyor layout with all zones, sensors, and motor locations
In InoProShop / AutoShop, map conveyor layout with all zones, sensors, and motor locations.
Step 2: Define product types, sizes, weights, and handling requirements
In InoProShop / AutoShop, define product types, sizes, weights, and handling requirements.
Step 3: Create tracking data structure with product ID, location, and destination
In InoProShop / AutoShop, create tracking data structure with product id, location, and destination.
Step 4: Implement zone control logic with proper handshaking between zones
In InoProShop / AutoShop, implement zone control logic with proper handshaking between zones.
Step 5: Add product tracking using sensor events and encoder feedback
In InoProShop / AutoShop, add product tracking using sensor events and encoder feedback.
Step 6: Program diverter/sorter logic based on product routing data
In InoProShop / AutoShop, program diverter/sorter logic based on product routing data.
Inovance Function Design:
InoProShop strongly favours function-block reuse via the Library Manager — Inovance ships standard libraries for motion, drives, HMI, OPC UA, and industry-specific applications (lithium-battery, EV, elevator). AutoShop reuse is open-coded via P-label subroutines. OEM machine-builders increasingly default to InoProShop / AM600 to access the FB libraries.
Common Challenges and Solutions:
1. Maintaining product tracking through merges and diverters
- Solution: Sequential Function Charts (SFC) addresses this through Perfect for sequential processes.
2. Handling products of varying sizes and weights
- Solution: Sequential Function Charts (SFC) addresses this through Clear visualization of process flow.
3. Preventing jams at transitions and merge points
- Solution: Sequential Function Charts (SFC) addresses this through Easy to understand process steps.
4. Coordinating speeds between connected conveyors
- Solution: Sequential Function Charts (SFC) addresses this through Good for batch operations.
Safety Considerations:
- E-stop functionality with proper zone isolation
- Pull-cord emergency stops along conveyor length
- Guard interlocking at all pinch points
- Speed monitoring to prevent runaway conditions
- Light curtains at operator access points
Performance Metrics:
- Task and I/O timing: Record minimum, average, and maximum values under a defined test load
- Accuracy: Define an acceptable tolerance and compare it with calibrated reference measurements
- Throughput: Count completed cycles over a fixed interval and record rejected or incomplete cycles
- Fault response: Measure detection, safe-state, alarm, and recovery behavior for each test case
- Resource use: Record memory, communications load, and diagnostic-buffer behavior
Inovance Diagnostic Tools:
InoProShop online mode with full POU monitoring and breakpoint debug,EtherCAT diagnostics page with topology and slave status,Trace tool for analogue / motion signal capture,OPC UA server diagnostics page,Modbus communication trace utility,AutoShop online mode for legacy AC800 / Easy series,Inovance HMI integrated diagnostics for HMI-PLC binding faults,Servo-drive panel diagnostics with InoProShop drive-monitor view,EtherCAT slave-firmware update tool,Project compare tool for change tracking
Use the monitoring and diagnostic functions available in your InoProShop / AutoShop version, and record the software, firmware, hardware, workload, and test procedure with every result.
Inovance Sequential Function Charts (SFC) Example for Conveyor Systems
Illustrative Sequential Function Charts (SFC) example for Conveyor Systems using Inovance terminology. Adapt the syntax to your InoProShop / AutoShop release, compile it, and verify it in an isolated test environment before use on equipment.
// Inovance InoProShop / AutoShop - Conveyor Systems Control
// Sequential Function Charts (SFC) Implementation for Material Handling
// On InoProShop projects, conventions follow CODESYS / IEC nor
// ============================================
// Variable Declarations
// ============================================
VAR
bEnable : BOOL := FALSE;
bEmergencyStop : BOOL := FALSE;
rPhotoelectricsensors : REAL;
rACDCmotors : REAL;
END_VAR
// ============================================
// Input Conditioning - Photoelectric sensors for product detection and zone occupancy
// ============================================
// Standard input processing
IF rPhotoelectricsensors > 0.0 THEN
bEnable := TRUE;
END_IF;
// ============================================
// Safety Interlock - E-stop functionality with proper zone isolation
// ============================================
IF bEmergencyStop THEN
rACDCmotors := 0.0;
bEnable := FALSE;
END_IF;
// ============================================
// Main Conveyor Systems Control Logic
// ============================================
IF bEnable AND NOT bEmergencyStop THEN
// Conveyor control systems manage the movement of materials th
rACDCmotors := rPhotoelectricsensors * 1.0; (* Illustrative scaling only *)
// Process monitoring
// Add specific control logic here
ELSE
rACDCmotors := 0.0;
END_IF;Code Explanation:
- 1.Sequential Function Charts (SFC) structure organized for a Conveyor Systems training example
- 2.Input conditioning handles Photoelectric sensors for product detection and zone occupancy signals
- 3.Safety interlock ensures E-stop functionality with proper zone isolation always takes priority
- 4.Main control implements Conveyor control systems manage the move
- 5.Adapt the scan-cycle assumptions to the selected AM600 task configuration and verify them by measurement
Best Practices
- ✓Follow Inovance naming conventions: On InoProShop projects, conventions follow CODESYS / IEC norms — PascalCase for
- ✓Inovance function design: InoProShop strongly favours function-block reuse via the Library Manager — Inova
- ✓Data organization: InoProShop uses GVLs and persistent variables for shared data. AutoShop uses D /
- ✓Sequential Function Charts (SFC): Start with a clear process flow diagram before implementing SFC
- ✓Sequential Function Charts (SFC): Use descriptive step names indicating what happens (e.g., Filling, Heating)
- ✓Sequential Function Charts (SFC): Keep transition conditions simple - complex logic goes in action code
- ✓Conveyor Systems: Use rising edge detection for sensor events, not level
- ✓Conveyor Systems: Implement proper debouncing for mechanical sensors
- ✓Conveyor Systems: Add gap checking before merges to prevent collisions
- ✓Debug with InoProShop / AutoShop: Use InoProShop's online mode to set breakpoints in POUs and step throu
- ✓Safety: E-stop functionality with proper zone isolation
- ✓Use a compatible simulator or isolated test rig to test Conveyor Systems logic before deployment
Common Pitfalls to Avoid
- ⚠Sequential Function Charts (SFC): Forgetting to include stop/abort transitions for emergency handling
- ⚠Sequential Function Charts (SFC): Creating deadlocks where no transition can fire
- ⚠Sequential Function Charts (SFC): Not handling the case where transition conditions never become TRUE
- ⚠Inovance common error: EtherCAT slave order mismatch after physical re-cabling — slave addressing break
- ⚠Conveyor Systems: Maintaining product tracking through merges and diverters
- ⚠Conveyor Systems: Handling products of varying sizes and weights
- ⚠Neglecting to validate Photoelectric sensors for product detection and zone occupancy leads to control errors
- ⚠Insufficient comments make Sequential Function Charts (SFC) programs unmaintainable over time
Related Certifications
Applying Sequential Function Charts (SFC) to Conveyor Systems using Inovance InoProShop / AutoShop requires understanding the platform, the process, and the project's acceptance criteria. This guide has covered implementation structure, an illustrative code example, verification practices, and common pitfalls for a beginner to intermediate Conveyor Systems exercise.
Use the practices outlined here to create a design that can be reviewed and tested. Define performance targets in the project requirements and confirm them with repeatable measurements.
Next Steps:
1. Check Sources: Read the current InoProShop / AutoShop help, controller manual, release notes, and relevant standards
2. Practice Safely: Adapt the example in a simulator or isolated training setup
3. Review: Have the I/O map, state behavior, faults, and recovery steps reviewed
4. Test: Record normal, boundary, fault, restart, and communications test results
Sequential Function Charts (SFC) Foundation:
Sequential Function Chart (SFC) is a graphical language for programming sequential processes. It models systems as a series of steps connected by tran...
Project duration depends on scope, reviews, hardware availability, software and firmware versions, testing, commissioning, and site constraints. Remember: Use rising edge detection for sensor events, not level
For further learning, explore related topics including Assembly sequences, Warehouse distribution, and Inovance platform-specific features for Conveyor Systems optimization.