Implementing Sequential Function Charts (SFC) for Assembly Lines using Delta WPLSoft / ISPSoft / DIADesigner-AX requires a documented design, applicable standards, and project-specific acceptance criteria. This guide organizes practical checks for code structure, diagnostics, testing, and maintenance.
The example references DVP-ES2 / EX2 / SS2 (compact entry)-family terminology, but model capabilities vary. Verify the controller manual, the installed WPLSoft / ISPSoft / DIADesigner-AX version, and any applicable machinery, process, electrical, or functional-safety requirements for the actual project.
Best practices for Assembly Lines encompass multiple dimensions: proper handling of 5 sensor types, safe control of 5 different actuators, managing cycle time optimization, and ensuring compliance with relevant industry standards. The Sequential Function Charts (SFC) approach, when properly implemented, provides perfect for sequential processes and clear visualization of process flow, both critical for intermediate to advanced projects.
This guide presents a reviewable approach to Delta Sequential Function Charts (SFC) programming for Assembly Lines, covering code organization, documentation, test procedures, and maintenance handoff. The sample logic is educational and must be compiled, simulated, peer-reviewed, and tested against the project's acceptance criteria before use on equipment.
Delta WPLSoft / ISPSoft / DIADesigner-AX for Assembly Lines
WPLSoft / ISPSoft / DIADesigner-AX is a programming environment associated with Delta controller families such as DVP-ES2 / EX2 / SS2 (compact entry), DVP-SX2 / SA2 / SV2 (motion + analogue), DVP-SE (Ethernet). This guide uses Sequential Function Charts (SFC) terminology from the supplied guide dataset, but controller capabilities and language support can change by model, firmware, software edition, and license.
Verify Before You Start:
- The selected controller supports the required Sequential Function Charts (SFC) constructs
- The project version matches the installed WPLSoft / ISPSoft / DIADesigner-AX release
- Required communications, motion, safety, and simulation options are licensed
- Firmware and device-description files are compatible with the project
- The vendor manuals used for the design match the exact hardware revision
Application Planning:
For a Assembly Lines exercise, map the required inputs and outputs before writing logic. The example considers 5 sensor types, including Vision systems, Proximity sensors, Force sensors, and 5 actuator types.
Control Equipment for Assembly Lines:
- Assembly workstations with fixtures
- Pallet transfer systems
- Automated guided vehicles (AGVs)
- Collaborative robots (cobots)
Controller-family references used in this guide include:
- DVP-ES2 / EX2 / SS2 (compact entry): Confirm CPU, I/O, memory, communications, and Sequential Function Charts (SFC) support in the current selection guide
- DVP-SX2 / SA2 / SV2 (motion + analogue): Confirm CPU, I/O, memory, communications, and Sequential Function Charts (SFC) support in the current selection guide
- DVP-SE (Ethernet): Confirm CPU, I/O, memory, communications, and Sequential Function Charts (SFC) support in the current selection guide
- DVP-EH3 (legacy high-end): Confirm CPU, I/O, memory, communications, and Sequential Function Charts (SFC) support in the current selection guide
Hardware Selection Checklist:
- Count local and remote I/O, including planned expansion
- Measure the required task and communications update rates
- Identify memory, data-retention, diagnostics, and cybersecurity requirements
- Treat safety functions as a separate, standards-led design activity
- Confirm lifecycle status, regional availability, licensing, and support
Source and Validation Note:
This page does not represent a vendor certification or a hardware acceptance test. Use current Delta manuals, release notes, and safety documentation as the authority for product-specific behavior. Validate adapted logic in a simulator or isolated test setup before connecting it to equipment.
Investment Considerations:
For Assembly Lines projects, compare hardware, software licensing, training, engineering, test equipment, commissioning, spares, and ongoing support. Obtain current pricing and lifecycle information directly from the vendor or an authorized regional supplier.
Understanding Sequential Function Charts (SFC) for Assembly Lines
Sequential Function Chart (SFC) is a graphical language for programming sequential processes. It models systems as a series of steps connected by transitions, ideal for batch processes and machine sequences.
Execution Model:
Only active steps execute their actions. Transitions define conditions for moving between steps. Multiple steps can be active simultaneously in parallel branches.
Core Advantages for Assembly Lines:
- Perfect for sequential processes: Critical for Assembly Lines when handling intermediate to advanced control logic
- Clear visualization of process flow: Critical for Assembly Lines when handling intermediate to advanced control logic
- Easy to understand process steps: Critical for Assembly Lines when handling intermediate to advanced control logic
- Good for batch operations: Critical for Assembly Lines when handling intermediate to advanced control logic
- Simplifies complex sequences: Critical for Assembly Lines when handling intermediate to advanced control logic
Why Sequential Function Charts (SFC) Fits Assembly Lines:
Assembly Lines systems in Manufacturing typically involve:
- Sensors: Part presence sensors for component verification, Proximity sensors for fixture and tooling position, Torque sensors for fastener verification
- Actuators: Pneumatic clamps and fixtures, Electric torque tools with controllers, Pick-and-place mechanisms
- Complexity: Intermediate to Advanced with challenges including Balancing work content across stations for consistent cycle time
Programming Fundamentals in Sequential Function Charts (SFC):
Steps:
- initialStep: Double-bordered box - starting point of sequence, active on program start
- normalStep: Single-bordered box - becomes active when preceding transition fires
- actions: Associated code that executes while step is active
Transitions:
- condition: Boolean expression that must be TRUE to advance
- firing: Transition fires when preceding step is active AND condition is TRUE
- priority: In selective branches, transitions are evaluated in defined order
ActionQualifiers:
- N: Non-stored - executes while step is active
- S: Set - sets output TRUE on step entry, remains TRUE
- R: Reset - sets output FALSE on step entry
Best Practices for Sequential Function Charts (SFC):
- Start with a clear process flow diagram before implementing SFC
- Use descriptive step names indicating what happens (e.g., Filling, Heating)
- Keep transition conditions simple - complex logic goes in action code
- Implement timeout transitions to prevent stuck sequences
- Always provide a path back to initial step for reset/restart
Common Mistakes to Avoid:
- Forgetting to include stop/abort transitions for emergency handling
- Creating deadlocks where no transition can fire
- Not handling the case where transition conditions never become TRUE
- Using S (Set) actions without corresponding R (Reset) actions
Typical Applications:
1. Bottle filling: Directly applicable to Assembly Lines
2. Assembly sequences: Related control patterns
3. Material handling: Related control patterns
4. Batch mixing: Related control patterns
Understanding these fundamentals prepares you to implement effective Sequential Function Charts (SFC) solutions for Assembly Lines using Delta WPLSoft / ISPSoft / DIADesigner-AX.
Implementing Assembly Lines with Sequential Function Charts (SFC)
Assembly line control systems coordinate the sequential addition of components to products as they move through workstations. PLCs manage station sequencing, operator interfaces, quality verification, and production tracking for efficient manufacturing.
This walkthrough demonstrates practical implementation using Delta WPLSoft / ISPSoft / DIADesigner-AX and Sequential Function Charts (SFC) programming.
System Requirements:
A typical Assembly Lines implementation includes:
Input Devices (Sensors):
1. Part presence sensors for component verification: Critical for monitoring system state
2. Proximity sensors for fixture and tooling position: Critical for monitoring system state
3. Torque sensors for fastener verification: Critical for monitoring system state
4. Vision systems for assembly inspection: Critical for monitoring system state
5. Barcode/RFID readers for part tracking: Critical for monitoring system state
Output Devices (Actuators):
1. Pneumatic clamps and fixtures: Primary control output
2. Electric torque tools with controllers: Supporting control function
3. Pick-and-place mechanisms: Supporting control function
4. Servo presses for precision insertion: Supporting control function
5. Indexing conveyors and pallets: Supporting control function
Control Equipment:
- Assembly workstations with fixtures
- Pallet transfer systems
- Automated guided vehicles (AGVs)
- Collaborative robots (cobots)
Control Strategies for Assembly Lines:
1. Primary Control: Automated production assembly using PLCs for part handling, quality control, and production tracking.
2. Safety Interlocks: Preventing Cycle time optimization
3. Error Recovery: Handling Quality inspection
Implementation Steps:
Step 1: Document assembly sequence with cycle time targets per station
In WPLSoft / ISPSoft / DIADesigner-AX, document assembly sequence with cycle time targets per station.
Step 2: Define product variants and option configurations
In WPLSoft / ISPSoft / DIADesigner-AX, define product variants and option configurations.
Step 3: Create I/O list for all sensors, actuators, and operator interfaces
In WPLSoft / ISPSoft / DIADesigner-AX, create i/o list for all sensors, actuators, and operator interfaces.
Step 4: Implement station control logic with proper sequencing
In WPLSoft / ISPSoft / DIADesigner-AX, implement station control logic with proper sequencing.
Step 5: Add poka-yoke (error-proofing) verification for critical operations
In WPLSoft / ISPSoft / DIADesigner-AX, add poka-yoke (error-proofing) verification for critical operations.
Step 6: Program operator interface for cycle start, completion, and fault handling
In WPLSoft / ISPSoft / DIADesigner-AX, program operator interface for cycle start, completion, and fault handling.
Delta Function Design:
WPLSoft P-labels are the primary reuse mechanism on DVP. ISPSoft instance-based function blocks enable proper IEC-style reuse on AH / AS, with library import / export. Delta-supplied motion, communication, and PID FBs ship with the IDE.
Common Challenges and Solutions:
1. Balancing work content across stations for consistent cycle time
- Solution: Sequential Function Charts (SFC) addresses this through Perfect for sequential processes.
2. Handling product variants with different operations
- Solution: Sequential Function Charts (SFC) addresses this through Clear visualization of process flow.
3. Managing parts supply and preventing stock-outs
- Solution: Sequential Function Charts (SFC) addresses this through Easy to understand process steps.
4. Recovering from faults while maintaining quality
- Solution: Sequential Function Charts (SFC) addresses this through Good for batch operations.
Safety Considerations:
- Two-hand start buttons for manual stations
- Light curtain muting for parts entry without stopping
- Safe motion for collaborative robot operations
- Lockout/tagout provisions for maintenance
- Emergency stop zoning for partial line operation
Performance Metrics:
- Task and I/O timing: Record minimum, average, and maximum values under a defined test load
- Accuracy: Define an acceptable tolerance and compare it with calibrated reference measurements
- Throughput: Count completed cycles over a fixed interval and record rejected or incomplete cycles
- Fault response: Measure detection, safe-state, alarm, and recovery behavior for each test case
- Resource use: Record memory, communications load, and diagnostic-buffer behavior
Delta Diagnostic Tools:
WPLSoft / ISPSoft online monitor with rung-state colour,Soft-element watch table and tag watch lists,Built-in offline simulator (WPLSoft and ISPSoft),Modbus RTU / TCP communication wizard with diagnostic counters,DIADesigner-AX integrated diagnostics for AX motion projects,M1000-range system flags for CPU and comms diagnostics,Delta distributor support and loaner CPUs in major markets,Delta IA forum and DeltaPLC community for application questions
Use the monitoring and diagnostic functions available in your WPLSoft / ISPSoft / DIADesigner-AX version, and record the software, firmware, hardware, workload, and test procedure with every result.
Delta Sequential Function Charts (SFC) Example for Assembly Lines
Illustrative Sequential Function Charts (SFC) example for Assembly Lines using Delta terminology. Adapt the syntax to your WPLSoft / ISPSoft / DIADesigner-AX release, compile it, and verify it in an isolated test environment before use on equipment.
// Delta WPLSoft / ISPSoft / DIADesigner-AX - Assembly Lines Control
// Sequential Function Charts (SFC) Implementation for Manufacturing
// WPLSoft / DVP work is dominated by raw soft-element addressi
// ============================================
// Variable Declarations
// ============================================
VAR
bEnable : BOOL := FALSE;
bEmergencyStop : BOOL := FALSE;
rVisionsystems : REAL;
rServomotors : REAL;
END_VAR
// ============================================
// Input Conditioning - Part presence sensors for component verification
// ============================================
// Standard input processing
IF rVisionsystems > 0.0 THEN
bEnable := TRUE;
END_IF;
// ============================================
// Safety Interlock - Two-hand start buttons for manual stations
// ============================================
IF bEmergencyStop THEN
rServomotors := 0.0;
bEnable := FALSE;
END_IF;
// ============================================
// Main Assembly Lines Control Logic
// ============================================
IF bEnable AND NOT bEmergencyStop THEN
// Assembly line control systems coordinate the sequential addi
rServomotors := rVisionsystems * 1.0; (* Illustrative scaling only *)
// Process monitoring
// Add specific control logic here
ELSE
rServomotors := 0.0;
END_IF;Code Explanation:
- 1.Sequential Function Charts (SFC) structure organized for a Assembly Lines training example
- 2.Input conditioning handles Part presence sensors for component verification signals
- 3.Safety interlock ensures Two-hand start buttons for manual stations always takes priority
- 4.Main control implements Assembly line control systems coordinate
- 5.Adapt the scan-cycle assumptions to the selected DVP-ES2 / EX2 / SS2 (compact entry) task configuration and verify them by measurement
Best Practices
- ✓Follow Delta naming conventions: WPLSoft / DVP work is dominated by raw soft-element addressing (X0, Y0, M100, D1
- ✓Delta function design: WPLSoft P-labels are the primary reuse mechanism on DVP. ISPSoft instance-based
- ✓Data organization: DVP has no structured data blocks — D / register banks are documented by range.
- ✓Sequential Function Charts (SFC): Start with a clear process flow diagram before implementing SFC
- ✓Sequential Function Charts (SFC): Use descriptive step names indicating what happens (e.g., Filling, Heating)
- ✓Sequential Function Charts (SFC): Keep transition conditions simple - complex logic goes in action code
- ✓Assembly Lines: Implement operation-level process data logging
- ✓Assembly Lines: Use standard station control template for consistency
- ✓Assembly Lines: Add pre-emptive parts request to avoid stock-out
- ✓Debug with WPLSoft / ISPSoft / DIADesigner-AX: Run the offline simulator with forced inputs before live download
- ✓Safety: Two-hand start buttons for manual stations
- ✓Use a compatible simulator or isolated test rig to test Assembly Lines logic before deployment
Common Pitfalls to Avoid
- ⚠Sequential Function Charts (SFC): Forgetting to include stop/abort transitions for emergency handling
- ⚠Sequential Function Charts (SFC): Creating deadlocks where no transition can fire
- ⚠Sequential Function Charts (SFC): Not handling the case where transition conditions never become TRUE
- ⚠Delta common error: Battery-low alarm on legacy DVP-EH causing D-range data loss
- ⚠Assembly Lines: Balancing work content across stations for consistent cycle time
- ⚠Assembly Lines: Handling product variants with different operations
- ⚠Neglecting to validate Part presence sensors for component verification leads to control errors
- ⚠Insufficient comments make Sequential Function Charts (SFC) programs unmaintainable over time
Related Certifications
Applying Sequential Function Charts (SFC) to Assembly Lines using Delta WPLSoft / ISPSoft / DIADesigner-AX requires understanding the platform, the process, and the project's acceptance criteria. This guide has covered implementation structure, an illustrative code example, verification practices, and common pitfalls for a intermediate to advanced Assembly Lines exercise.
Use the practices outlined here to create a design that can be reviewed and tested. Define performance targets in the project requirements and confirm them with repeatable measurements.
Next Steps:
1. Check Sources: Read the current WPLSoft / ISPSoft / DIADesigner-AX help, controller manual, release notes, and relevant standards
2. Practice Safely: Adapt the example in a simulator or isolated training setup
3. Review: Have the I/O map, state behavior, faults, and recovery steps reviewed
4. Test: Record normal, boundary, fault, restart, and communications test results
Sequential Function Charts (SFC) Foundation:
Sequential Function Chart (SFC) is a graphical language for programming sequential processes. It models systems as a series of steps connected by tran...
Project duration depends on scope, reviews, hardware availability, software and firmware versions, testing, commissioning, and site constraints. Remember: Implement operation-level process data logging
For further learning, explore related topics including Assembly sequences, Electronics manufacturing, and Delta platform-specific features for Assembly Lines optimization.